Support Home

Customer Display Technical Reference

  1. Start the MS-DOS prompt by clicking Start then Programs then MS-DOS prompt.
  2. At the c:> prompt, type: mode comX 9600,n,8,1 (where X is the com port number that the pole display is connected to)
  3. Press the enter key and you should get a reply as follows:
  4. Type: dir > com3 and press the enter key in order to send some data to display in the pole display.

The EC3010 Customer Pole Display comes with a long and a short pole. The height of the Pole Display can be adjusted in the following height combination.

More Questions?

Contact Us